These products are not recommended for new designs. We recommend that you use a product from our current range of series for new designs.
This product is not recommended for new designs. Nordic recommends the nRF24AP2-8CH, nRF24AP2-1CH or nRF24AP2-USB for new designs.
The nRF24AP1 is a highly integrated single-chip 4-channel ANT™ Connectivity IC. It includes an ultra low power 2.4GHz RF transceiver and a fully embedded enhanced ANT protocol stack, plus a flexible serial interface supporting a wide range application microcontrollers.
This product is not recommended for new designs. Nordic recommends its drop-in compatible nRF24L01+ or for a System-on-Chip solution the Nordic nRF24LE1 or nRF24LU1+ for new designs.
nRF24L01 is a highly integrated, ultra-low power (ULP) 2 Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific and Medical) band.
This product is not recommended for new designs. Nordic recommends the nRF24L01+ or for a System-on-Chip solution either the Nordic nRF24LE1 or nRF24LU1+ for new designs.
nRF2401A is a highly integrated, ultra low power (ULP) 1Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific and Medical) band.
This product is not recommended for new designs. Nordic recommends the nRF24L01+ or for a System-on-Chip solution either the Nordic nRF24LE1 or nRF24LU1+ for new designs.
nRF2402 is a highly integrated, ultra low power (ULP) 1Mbps RF transmitter IC for the 2.4GHz ISM (Industrial, Scientific and Medical) band. With peak TX currents lower than 12mA, a sub μA power down mode, advanced power management, and 1.9 to 3.6V supply range.
This product is not recommended for new designs. Nordic recommends the nRF24LU1+ for new designs.
nRF24LU1 integrates a Nordic nRF24L01 2.4GHz RF transceiver core, enhanced 16MHz 8-bit 8051 compatible CPU, 2kB + 256B RAM, 16kB embedded Flash, a Full-speed USB 2.0-compliant device controller, and a range of system peripherals including a hardware AES co-processor and PWM.
This product is not recommended for new designs. Nordic recommends the nRF24LE1 or nRF24LE1 OTP for new designs.
nRF24E1 is a low power, 2.4GHz RF SoC for the 2.4GHz ISM (Industrial, Scientific and Medical) band. It includes a 2.4 GHz RF transceiver core, 8-bit CPU and RAM code memory.
This product is not recommended for new designs. Nordic recommends the nRF24LE1 or nRF24LE1 OTP for new designs.
nRF24E2 is a low power, 2.4GHz RF transmitter SoC for the 2.4GHz ISM (Industrial, Scientific and Medical) band. It includes a 2.4GHz RF transmitter core, 8-bit CPU, and RAM code memory.
The nRF24Z1 is not recommended for new designs as of 2nd July 2014. New nRF24Z1 projects registered with Nordic Technical Support after Sept 1st 2014 will not be supported.
nRF24Z1 is a highly integrated 2.4 GHz RF Stereo Audio Streamer. It features a 4 Mbps on-air data-rate that supports the streaming of uncompressed CD quality audio in full 16-bit 48 kHz stereo.