ANT channel configuration

This information applies to the following SoftDevice: S212

This module configures the ANT channel according to the configuration structure ant_channel_config_t.

The API for this module is available here: ANT channel configuration

The following code example shows how to use the module:

void user_ant_channel(void)
{
 uint32_t err_code;

 err_code = sd_ant_network_address_set(NETWORK_NUMBER, m_network_key); // This function must be called before the channel is initialized.
 APP_ERROR_CHECK(err_code);

 const ant_channel_config_t channel_config = 
 {
 .channel_number = CHANNEL_NUMBER,
 .channel_type = CHANNEL_TYPE_SLAVE,
 .ext_assign = EXT_ASSIGN,
 .rf_freq = RF_FREQ,
 .transmission_type = TRANSMISSION_TYPE,
 .device_type = DEVICE_TYPE,
 .device_number = DEVICE_NUMBER,
 .channel_period = CHANNEL_PERIOD,
 .network_number = NETWORK_NUMBER,
#if ANT_CONFIG_ENCRYPTED_CHANNELS > 0
 .p_crypto_settings = NULL
#endif
 };
 ant_channel_init(&channel_config);

 err_code = sd_ant_channel_open(CHANNEL_NUMBER);
 APP_ERROR_CHECK(err_code);
}