To quickly test an example without having to install the full toolchain, program a precompiled example application on your development board.
The zip version of the SDK provides precompiled HEX files for most of the supplied examples. For examples that require a SoftDevice, the SoftDevice is included in the HEX file.
Note that the SDK does not include precompiled ANT+ examples. To run ANT+ examples, you must therefore set up your toolchain. Follow the instructions in Running examples that use a SoftDevice and Running the example to program the SoftDevice and example.
Perform the following steps to program a precompiled example:
hex
subdirectory. For example, for the Blinky Example, navigate to examples\peripheral\blinky\hex
.To test the example, follow the testing instructions in the Examples documentation. Depending on the example that you programmed, it might be sufficient to observe the LEDs on the board. Other examples require you to connect to the board via UART, nRF Connect for Desktop, or a phone app.