Important: Before you run this example, make sure to program the SoftDevice.
The Immediate Alert Client Application is an example that implements the Immediate Alert using the hardware delivered in the nRF5 Development Kit. The Immediate Alert Client example sends alerts to the remote device (for example, a smartphone).
The application includes the Immediate Alert Service Client.
At each power up and disconnect, the Immediate Alert Client Application will perform 3 minutes of fast advertising without whitelist, which is indicated by the BSP_INDICATE_ADVERTISING state. It will then switch to sleep mode, and the state BSP_INDICATE_IDLE is indicated. When an alert is signaled using the Immediate Alert Service Client, it is indicated on the remote device by changing the value of the Alert Level characteristic.
You can find the source code and the project file of the example in the following folder: <InstallFolder>\examples\ble_peripheral\ble_app_ias_c
Button assignments - in addition to those defined in BSP BLE Button Assignments:
Test the Find Me locator (Immediate Alert Service Client) functionality by performing the following steps:
<InstallFolder>\examples\ble_peripheral\ble_app_ias_c
folder. Load the file findMeMasterServer.ncs
.You can also test the Immediate Alert Service Client by using the Immediate Alert Server Application as a Central.