Set command

The set command returns information for an active Packet Data Network (PDN) connection.



Response syntax:

+CGCONTRDP: <cid>,<bearer_id>,<apn>[,<local_addr_and_subnet_mask>[,<gw_addr>[,

The set command parameters and their defined values are the following:

Integer, 0–10 (mandatory).
Integer. Not supported.
String. A logical name for the network.
String. Not supported.
String. Not supported.
<DNS_prim_addr>, <DNS_sec_addr>
String. DNS server IP address.
IPv4 Maximum Transmission Unit (MTU) size.
Note: If the PDN connection has dual stack capabilities, at least one pair of lines with information is returned per <cid>: First one line with the IPv4 parameters followed by one line with the IPv6 parameters.

The following command example reads dynamic parameters for an initial PDN connection:

+CGCONTRDP: 0,,"internet","","","","",,,,,1028