Set command

The set command is used to control features that aim to reduce LTE idle mode mobility.

Syntax:

%REDMOB=<mode>

The set command parameter and its defined values are the following:

<mode>
0 – Default. Functionality according to the 3GPP relaxed monitoring feature.
1 – Enable Nordic-proprietary reduced mobility feature.
2 – Full measurements for best possible mobility. Disable the 3GPP relaxed monitoring and Nordic-proprietary reduced mobility features.

The following command example enables the Nordic-proprietary reduced mobility feature:

AT%REDMOB=1
OK

The following command example disables all reduced mobility functionality:

AT%REDMOB=2
OK