Set command

The set command activates and deactivates the support of the Release Assistance Indication (RAI) feature. The command configuration is stored to Non-volatile Memory (NVM) approximately every 48 hours and when the modem is set to minimum functionality mode with the +CFUN=0 command.

Active %XPOFWARN warning blocks the storing to NVM.

Syntax:

%RAI[=<rai>]

The set command parameter and its defined values are the following:

<rai>
0 – Deactivate
1 – Activate

The following command example activates RAI feature support:

AT%RAI=1
OK
Parent topic: Release assistance indication %RAI