Read command

The read command is used to read the requested Extended Discontinuous Reception (eDRX) parameters.

Response syntax:

+CEDRXS: <AcT-type>,<Requested_eDRX_value>

The read command parameters and their defined values are the following:

0 – Current cell is not using eDRX. Used only in the unsolicited result code.
4 − Evolved Terrestrial Radio Access Network (E-UTRAN) (WB-S1 mode)
5 − E-UTRAN (NB-S1 mode)
String. Half a byte in 4-bit format. The eDRX value refers to bit 4 to 1 of octet 3 of the Extended DRX parameters information element (see 3GPP TS 24.008, subclause

The following command example reads the requested eDRX value:

+CEDRXS: 4,"0001"