The set command activates or deactivates unsolicited reporting of error codes sent by
the network.
Syntax:
+CNEC=[<n>]
The set command parameters and their defined values are the following:
- <n>
- 0 – Disable unsolicited error reporting
- 8 – Enable unsolicited result code
+CNEC_EMM:
<error_code>[,<cid>] to report Evolved Packet System (EPS)
mobility management errors
- 16 – Enable unsolicited result code
+CNEC_ESM:
<error_code>[,<cid>] to report EPS session management errors
- 24 – Enable unsolicited result codes for
+CNEC_EMM:
<error_code>[,<cid>] and +CNEC_ESM:
<error_code>[,<cid>]
- <error_code>
- 3GPP TS 24.301 Table 9.9.3.9.1 for EPS mobility management errors
codes
- 3GPP TS 24.301 Table 9.9.4.4.1 for EPS session management errors
codes
- <cid>
- 0–10. <cid> is present if <error_code>
is related to a specific <cid>.
The following command example enables CNEC_ESM error codes:
AT+CNEC=16
OK