The proprietary %XEMPR command allows to configure an extra reduction
of 0.5 or 1 dB to the maximum transmission power on all or selected supported 3GPP bands
separately in the Narrowband Internet of Things (NB-IoT) and LTE-M
modes.
v2.0.x
Note:
- The use of this command in the nRF91x1 modem firmware
image can be permanently prevented with the %XPRODDONE command.
- The %XEMPR TX power reduction feature can be used in the
Production Test Image (PTI) modem firmware image even if the %XEMPR
feature has been disabled with %XPRODDONE.