The set command performs RF testing.
Syntax:
%XRFTEST=<test>,<operation>,<param0>,<param1>,…,<param10>
The set command parameters and their defined values are the following:
- <test>
- 0 – RX
- 1 – TX
- 2 – GPS SNR
- 3 – RX SNR
- 4 – AFCv1.2.xpti_v1.1.x≥1
- 10 – RF sensorsv1.2.xpti_v1.1.x≥1
- <operation>
- 0 – OFF
- 1 – ON
- 3 – SETv1.2.x
- <paramX>
- One or more int16 values. The usage and number of parameters depends on
<test> and <operation>. See the
following sections.