nRF91 AT commands: RF sensor test %XRFTEST

The Nordic-proprietary %XRFTEST command allows to read the temperature sensor next to the Power Amplifier (PA) inside the System in Package (SiP) and another temperature sensor inside the nRF9120 System on Chip (SoC).v1.2.xv1.3.xpti_v1.1.x≥1

The %XRFTEST command allows starting RF to a desired frequency to test, debug, and verify configurations that depend on RF frequency, such as %XMAGPIO and %XMIPIRFFECTRL.

Note:

The use of this command in the nRF9160 modem firmware image can be permanently prevented with the %XPRODDONE command.
The %XRFTEST test features can be used in the Production Test Image (PTI) modem firmware image even if the %XRFTEST test features have been disabled with %XPRODDONE.pti_v1.1.x≥3
%XRFTEST cannot be used if the modem has already been activated with the %CFUN command.v1.3.x≥4