nrf9160

Set command

The set command indicates the modem an external IP stack IPv6 address resolution or refresh failure.

Syntax:

%XIPV6FAIL=<cid>,<failure_type>

The set command parameters and their defined values are the following:

<cid>
Integer, 0-10.
<failure_type>
0 – IPv6 address refresh failure
1 – IPv6 address resolution failure

The following command example indicates the modem an IPv6 address resolution failure in the default context identifier 0:

AT%XIPV6FAIL=0,1
OK
Parent topic: External IP stack IPv6 address resolution/refresh failure %XIPV6FAIL