Set command

The set command selects ePCO/Protocol Configuration Options (PCO) usage. The command configuration is stored to Non-volatile Memory (NVM) approximately every 48 hours and when the modem is powered off with the +CFUN=0 command.

Active %XPOFWARN warning blocks the storing to NVM.v1.3.x≥2

Syntax:

%XEPCO=<epco>

The set command parameter and its defined values are the following:

<epco>
0 – Use PCO
1 – Use ePCO

The following command example disables ePCO and selects PCO:

AT%XEPCO=0
OK
Parent topic: Usage of ePCO/PCO in PDN connection establishment %XEPCO