Test command

The test command reads supported modes and buffering settings.

Response syntax:

+CGEREP: (list of supported <mode>s),(list of supported <bfr>s)

The test command parameters and their defined values are the following:

0 – Do not forward unsolicited result codes to the Terminal Equipment (TE) (default).
1 – Discard unsolicited result codes when the Mobile Termination (MT) TE link is reserved. Otherwise, forward them directly to the TE.
0 – MT buffer of unsolicited result codes is cleared when <mode> 1 is entered.

The following command example lists supported modes and buffering settings:

+CGEREP: (0,1),(0)