Set command

The set command enables or disables the sending of packet domain events. The unsolicited result code is +CGEV: XXX.

For information on +CGEV, see Packet domain event unsolicited result codes +CGEV.

Syntax:

+CGEREP=[<mode>]

The command parameter and its defined values are the following:

<mode>
0 – Do not forward unsolicited result codes to the Terminal Equipment (TE) (default).
1 – Discard unsolicited result codes when the Mobile Termination (MT) TE link is reserved. Otherwise, forward them directly to the TE.

The following command example subscribes CGEV notifications:

AT+CGEREP=1
OK