Set command

The set command sets the support for averaging cell search mode to detect weak cells.

The feature is available in Narrowband Internet of Things (NB-IoT) and it increases the probability to find weak cells. When the setting is disabled, it stops the possible ongoing deep searches immediately. The command configuration is stored to Non-volatile Memory (NVM) approximately every 48 hours and when the modem is powered off with the +CFUN=0 command.

Note: Enabling this command reduces battery lifetime.

Syntax:

%XDEEPSEARCH=<deep_search>

The set command parameter and its defined values are the following:

<deep_search>
0 – Disable deep search
1 – Enable deep search

The following command example enables deep search support:

AT%XDEEPSEARCH=1
OK