The set command is used to control features that aim to reduce LTE idle mode
mobility.
Syntax:
%REDMOB=<mode>
The set command parameter and its defined values are the following:
- <mode>
- 0 – Default. Functionality according to the 3GPP relaxed monitoring feature.
Note: The 3GPP relaxed monitoring feature is not supported in current
modem release versions. The modem functionality in <mode>
0 is the same as in <mode >
2. The 3GPP relaxed monitoring feature will be available in future
releases as the default functionality.
- 1 – Enable Nordic-proprietary reduced mobility feature.
- 2 – Full measurements for best possible mobility. Disable the 3GPP relaxed monitoring
and Nordic-proprietary reduced mobility features.
The following command example enables the Nordic-proprietary reduced mobility feature:
AT%REDMOB=1
OK
The following command example disables all reduced mobility functionality:
AT%REDMOB=2
OK