Set command

The set command enables and disables the support of the Release Assistance Indication (RAI) feature. The command configuration is stored to Non-volatile Memory (NVM) approximately every 48 hours and when the modem is powered off with the +CFUN=0 command.

Active %XPOFWARN warning blocks the storing to NVM.v1.3.x≥2
Note: Enabling RAI requires feature activation with the %REL14FEAT command.

Syntax:

%RAI[=<rai>]

The set command parameter and its defined values are the following:

<rai>
0 – Disabled
1 – Enabled

The following command example enables RAI feature support:

AT%RAI=1
OK