The read command is used to read the requested Extended Discontinuous Reception (eDRX)
parameters.
Response syntax:
+CEDRXS: <AcT-type>,<Requested_eDRX_value>
The read command parameters and their defined values are the following:
- <ActT-type>
- 0 – Current cell is not using eDRX. Used only in the unsolicited result code.v1.3.x≥4
- 4 − Evolved Terrestrial Radio Access Network (E-UTRAN) (WB-S1 mode)
- 5 − E-UTRAN (NB-S1 mode)
- <Requestd_eDRX_value>
- String. Half a byte in 4-bit format. The eDRX value refers to bit 4 to 1 of octet 3 of
the Extended DRX parameters information element (see 3GPP TS 24.008, subclause
10.5.5.32).
The following command example reads the requested eDRX value:
AT+CEDRXS?
+CEDRXS: 4,"0001"
OK