nrf9160

Set command

The set command sets the battery voltage low level for a modem. The command configuration is stored to Non-volatile Memory (NVM) approximately every 48 hours and when the modem is set to minimum functionality mode with the +CFUN=0 command.

Active %XPOFWARN warning blocks the storing to NVM.v1.3.x≥2

Syntax:

%XVBATLOWLVL=<battery_level>

The set command parameter and its defined value are the following:

<battery_level>
Integer, 3100–5000 mV. Factory default 3300 mV.

The following command example sets the battery voltage low level to 3500 mV:

AT%XVBATLOWLVL=3500
OK
Parent topic: Battery voltage low level %XVBATLOWLVL