Set command

When the high temperature level is reached, data transmission should be controlled and minimized to prevent modem overheating. The command configuration is stored to Non-volatile Memory (NVM) approximately every 48 hours and when the modem is set to minimum functionality mode with the +CFUN=0 command.

Active %XPOFWARN warning blocks the storing to NVM.v1.3.x≥2

Syntax:

%XTEMPHIGHLVL=<temperature>

The set command parameter and its defined value are the following:

<temperature>

Integer.

Celsius degrees between 1 and 85. Factory default 55.

Celsius degrees between 1 and 90. Factory default 55.v1.3.x≥1

The following command example sets the high temperature level:

AT%XTEMPHIGHLVL=60
OK