The table below details the expected peak achievable UDP/TCP throughput numbers for a Quad Serial Peripheral Interface (QSPI)/Serial Peripheral Interface (SPI) master clock rate of 24 MHz, and where the networking stack executing on the host is not a limiting factor. These numbers are projected using measured raw QSPI/SPI master packet transmission rates.
Symbol | Parameter | Min. | Nom. | Max. | Units | Note |
---|---|---|---|---|---|---|
tUDP,TX,QSPI | Max UDP TX mode throughput over QSPI | 56 | Mbps | |||
tUDP,RX,QSPI | Max UDP RX mode throughput over QSPI | 61 | Mbps | |||
tUDP,TX,SPIM | Max UDP TX mode throughput over SPIM | 14 | Mbps | |||
tUDP,RX,SPIM | Max UDP RX mode throughput over SPIM | 14 | Mbps | |||
tTCP,TX,QSPI | Max TCP TX mode throughput over QSPI | 40 | Mbps | |||
tTCP,RX,QSPI | Max TCP RX mode throughput over QSPI | 42 | Mbps | |||
tTCP,TX,SPIM | Max TCP TX mode throughput over SPIM | 12 | Mbps | |||
tTCP,RX,SPIM | Max TCP RX mode throughput over SPIM | 12 | Mbps |