This Product Specification contains functional descriptions, register tables, and electrical specifications, and is organized into chapters based on the modules and peripherals that are available in this IC.
Note: The HTML rendition of the Product Specification corresponds to the latest
version only. All versions are available as PDF files.
Features: |
- Bluetooth 5.1, IEEE
802.15.4-2006, 2.4 GHz transceiver
- -95 dBm sensitivity in 1 Mbps Bluetooth Low Energy mode
- -103 dBm sensitivity in 125 kbps Bluetooth Low Energy mode (long range)
- -20 to +8 dBm TX power, configurable in 4 dB steps
- On-air compatible with nRF52, nRF51, nRF24L, and nRF24AP Series
- Supported data rates:
- Bluetooth 5.1
– 2 Mbps, 1 Mbps, 500 kbps, and 125 kbps
- IEEE 802.15.4-2006 – 250 kbps
- Proprietary 2.4 GHz – 2 Mbps, 1 Mbps
- Angle-of-arrival (AoA) and angle-of-departure (AoD) direction finding using Bluetooth
- Single-ended antenna output (on-chip balun)
- 128-bit AES/ECB/CCM/AAR co-processor (on-the-fly packet encryption)
- 4.9 mA peak current in TX (0 dBm)
- 4.7 mA peak current in RX
- RSSI (1 dB resolution)
- Arm®
Cortex®-M4 32-bit processor, 64 MHz
- 144 EEMBC CoreMark® score running from flash memory
- 33 µA/MHz running CoreMark from flash memory
- 33 µA/MHz running CoreMark from RAM
- Serial wire debug (SWD)
- Flexible power management
- 1.7 V to 5.5 V supply voltage range
- On-chip DC/DC and LDO regulators with automated low
current modes
- Automated peripheral power management
- Fast wake-up using 64 MHz internal oscillator
- 0.3 µA at 3 V in System OFF mode, no RAM retention
- 1.2 µA at 3 V in System ON mode, no RAM retention, wake
on RTC
|
- 256 kB flash and 32 kB RAM
- Advanced on-chip interfaces
- USB 2.0 full speed (12 Mbps) controller
- Programmable peripheral interconnect (PPI)
- 18 general purpose I/O pins
- EasyDMA automated data transfer between memory and
peripherals
- Nordic SoftDevice ready with support for concurrent
multiprotocol
- 64 level comparator
- Temperature sensor
- 4x 32-bit timer with Counter mode
- Up to 2x SPI master/slave with EasyDMA
- Up to 2x I2C compatible two-wire master/slave
- UART (CTS/RTS) with EasyDMA
- Quadrature decoder (QDEC)
- 2x real-time counter (RTC)
- Single crystal operation
- Operating temperature from -40 to 105 °C
- Package variants
- QFN40 package, 5 x 5 mm
- WLCSP package, 2.531 x 2.531 mm
|
Applications: |
- Advanced computer peripherals and I/O devices
- Mouse
- Keyboard
- Multi-touch trackpad
|
- Internet of things (IoT)
- Smart home sensors and controllers
- Industrial IoT sensors and controllers
- Interactive entertainment devices
- Remote controls
- Gaming controllers
|