nPM1300 Ordering information

IC marking

The nPM1300 PMIC package is marked as shown in the following figure.

Figure 1. IC marking

The following figures define the box labels used for nPM1300.

Figure 2. Inner box label

Figure 3. Outer box label

The following tables define nPM1300 order codes and definitions.

Figure 4. Order code

Table 1. Abbreviations
Abbreviation	Definition and implemented codes
nPM13	nPM13 series product
00	Part code
<PP>	Package variant code
<VV>	Function variant code
<H><P><F>	Build code H - Hardware version code P - Production configuration code (production site, etc.) F - Firmware version code (only visible on shipping container label)
<YY><WW><LL>	Tracking code YY - Year code WW - Assembly week number LL - Wafer lot code
<CC>	Container code
eX	2^nd level Interconnect Symbol where value of X is based on J-STD-609

The following tables define nPM1300 code ranges and values.

Table 2. Package variant codes
<PP>	Package	Size (mm)	Pin/Ball count	Pitch (mm)
CA	WLCSP	3.1x2.4	35	0.419 0.440
QE	QFN	5.0x5.0	32	0.5

Table 3. Function variant codes
<VV>	Flash (kB)	RAM (kB)
AA	n/a	n/a

Table 4. Hardware version codes
<H>	Description
[A . . Z]	Hardware version/revision identifier (incremental)

Table 5. Production configuration codes
<P>	Description
[0 . . 9]	Production device identifier (incremental)
[A . . Z]	Engineering device identifier (incremental)

Table 6. Production version codes
<F>	Description
[A . . N, P . . Z]	Version of preprogrammed firmware
[0]	Delivered without preprogrammed firmware

Table 7. Year codes
<YY>	Description
[16 . . 99]	Production year: 2016 to 2099

Table 8. Week codes
<WW>	Description
[1 . . 52]	Week of production

Table 9. Lot codes
<LL>	Description
[AA . . ZZ]	Wafer production lot identifier

Table 10. Container codes
<CC>	Description
R7	7" Reel
R	13" Reel

The following tables define nPM1300 product options.

Table 12. Development tools order code
Order code	Description
nPM1300-EK	Evaluation kit