New and inherited anomalies

Table 1. New and inherited anomalies
ID	Module	Description	New in Engineering B
20	RTC	Register values are invalid	X
36	CLOCK	Some registers are not reset when expected	X
66	TEMP	Linearity specification not met with default settings	X
78	TIMER	High current consumption when using timer STOP task only	X
136	System	Bits in RESETREAS are set when they should not be	X
173	GPIO	Writes to LATCH register take several CPU cycles to take effect	X
176	System	Flash erase through CTRL-AP fails due to watchdog time-out	X
184	NVMC	Erase or write operations from the external debugger fail when CPU is not halted	X
187	USBD	USB cannot be enabled	X
210	GPIO	Bits in GPIO LATCH register are incorrectly set to 1	X
219	TWIM	I2C timing spec is violated at 400 kHz	X
223	USBD	Unexpected behavior after reset	X
225	RADIO	RSSI parameter adjustment	X
228	RADIO	No interrupt is generated for SYNC event	X
233	NVMC	NVMC READYNEXT not generated	X
243	RADIO	T_IFS is inaccurate with Bluetooth Long Range	X
245	RADIO	CRC is wrong when data whitening is enabled and address field is included in CRC calculation	X
246	System	Intermittent extra current consumption when going to sleep	X
248	RADIO	Reading DTX in MODECNF0 gives incorrect value	X
251	NVMC	NVMC ERASEALL is blocked when access port protection is enabled	X
258	RADIO	PHYEND event is delayed for some AoA and AoD configurations	X

[20] RTC: Register values are invalid
This anomaly applies to IC Rev. Engineering B, build codes QDAA-BC0.

[36] CLOCK: Some registers are not reset when expected
This anomaly applies to IC Rev. Engineering B, build codes QDAA-BC0.

[66] TEMP: Linearity specification not met with default settings
This anomaly applies to IC Rev. Engineering B, build codes QDAA-BC0.

[78] TIMER: High current consumption when using timer STOP task only
This anomaly applies to IC Rev. Engineering B, build codes QDAA-BC0.

[136] System: Bits in RESETREAS are set when they should not be
This anomaly applies to IC Rev. Engineering B, build codes QDAA-BC0.

[173] GPIO: Writes to LATCH register take several CPU cycles to take effect
This anomaly applies to IC Rev. Engineering B, build codes QDAA-BC0.

[176] System: Flash erase through CTRL-AP fails due to watchdog time-out
This anomaly applies to IC Rev. Engineering B, build codes QDAA-BC0.

[184] NVMC: Erase or write operations from the external debugger fail when CPU is not halted
This anomaly applies to IC Rev. Engineering B, build codes QDAA-BC0.

[187] USBD: USB cannot be enabled
This anomaly applies to IC Rev. Engineering B, build codes QDAA-BC0.

[210] GPIO: Bits in GPIO LATCH register are incorrectly set to 1
This anomaly applies to IC Rev. Engineering B, build codes QDAA-BC0.

[219] TWIM: I2C timing spec is violated at 400 kHz
This anomaly applies to IC Rev. Engineering B, build codes QDAA-BC0.

[223] USBD: Unexpected behavior after reset
This anomaly applies to IC Rev. Engineering B, build codes QDAA-BC0.

[225] RADIO: RSSI parameter adjustment
This anomaly applies to IC Rev. Engineering B, build codes QDAA-BC0.

[228] RADIO: No interrupt is generated for SYNC event
This anomaly applies to IC Rev. Engineering B, build codes QDAA-BC0.

[233] NVMC: NVMC READYNEXT not generated
This anomaly applies to IC Rev. Engineering B, build codes QDAA-BC0.

[243] RADIO: T_IFS is inaccurate with Bluetooth Long Range
This anomaly applies to IC Rev. Engineering B, build codes QDAA-BC0.

[245] RADIO: CRC is wrong when data whitening is enabled and address field is included in CRC calculation
This anomaly applies to IC Rev. Engineering B, build codes QDAA-BC0.

[246] System: Intermittent extra current consumption when going to sleep
This anomaly applies to IC Rev. Engineering B, build codes QDAA-BC0.

[248] RADIO: Reading DTX in MODECNF0 gives incorrect value
This anomaly applies to IC Rev. Engineering B, build codes QDAA-BC0.

[251] NVMC: NVMC ERASEALL is blocked when access port protection is enabled
This anomaly applies to IC Rev. Engineering B, build codes QDAA-BC0.

[258] RADIO: PHYEND event is delayed for some AoA and AoD configurations
This anomaly applies to IC Rev. Engineering B, build codes QDAA-BC0.