The NFC Adafruit Tag Reader Example shows how to use the Adafruit NFC Shield library in combination with the Type 2 Tag parser and the Message and record parser to create an NFC polling device. This device can then be used to read and parse the content of an NFC Type 2 Tag.
The example requires the Adafruit PN532 NFC Shield. It can be run on both nRF51 and nRF52 devices.
When the example application starts, it initializes the Adafruit PN532 NFC Shield and waits for a Type 2 Tag to appear in the field. When a tag is detected, the application reads it and parses its content. After successful parsing, the tag content is printed on the serial port.
You can find the source code and project file of the example in the following folder: <InstallFolder>\examples\nfc\adafruit_tag_reader
Test the Adafruit Tag Reader Example application by performing the following steps: