nRF5 SDK v11.0.0
Installing the SDK

Before you install the SDK, make sure that you have all required tools installed. For nRF52 Development Kits, see Setting up the development kit. For nRF51 Development Kits, follow the steps in section 3 (Getting started) in the nRF51 Development Kit User Guide.

To set up your environment:

  1. Download the repository file nRF5_SDK_x.x.x_xxxxxxx.zip (for example, nRF5_SDK_11.0.0_1a2b3c4.zip) from developer.nordicsemi.com.
  2. Extract the zip file to the directory that you want to use to work with the SDK.
  3. Install the nRF5 MDK:
    • If you use Keil 5, open an example project. Keil will then prompt you to install the nRF_DeviceFamilyPack. If Keil does not prompt you, open the Pack Installer, click the Check For Updates button, and install the latest nRF_DeviceFamilyPack.
    • If you use Keil 4, double-click the nRF5x_MDK_x_x_x_Keil4.msi file in the extracted directory to install the MDK.
    • If you use IAR, double-click the nRF5x_MDK_x_x_x_IAR.msi file in the extracted directory to install the MDK.
    • If you use GCC, the MDK is delivered with the SDK and does not need to be installed separately.

Documentation feedback | Developer Zone | Updated