Serial status codes

Most serial commands sent to an nRF5 device will yield a command response from the device. This command response always contains a status field that indicates whether the command succeeded or what the reason for failing was.

The following table lists status codes yielded by the mesh serial interface.

Code	Name	Description
0x00	SUCCESS	The command completed successfully.
0x80	ERROR_UNKNOWN	An unknown error occured.
0x81	ERROR_INTERNAL	An internal error occured. This indicates that there could be something wrong with the serial command handler implementation.
0x82	ERROR_CMD_UNKNOWN	The command was not recognized by the mesh device.
0x83	ERROR_INVALID_STATE	The command was received at a time when the state of the device prevents it from processing it.
0x84	ERROR_INVALID_LENGTH	The length of the received command was incorrect.
0x85	ERROR_INVALID_PARAMETER	One or more of the command parameters were incorrect.
0x86	ERROR_BUSY	The mesh device was busy processing a previous command, or a required resource was temporarily unavailable.
0x87	ERROR_INVALID_DATA	Invalid data was sent as part of the command parameters.
0x8e	ERROR_REJECTED	The command was rejected, either because of insufficient resources or because the requested resource was temporarily unavailable.
0x93	ERROR_TIMEOUT	The command processing was aborted because of a timeout.
0x98	ERROR_INVALID_KEY_DATA	The key data sent as part of the command parameters was invalid.