Most serial commands sent to an nRF5 device will yield a command response from the device. This command response always contains a status field that indicates whether the command succeeded or what the reason for failing was.
The following table lists status codes yielded by the mesh serial interface.
Code | Name | Description |
---|---|---|
0x00 | SUCCESS | The command completed successfully. |
0x80 | ERROR_UNKNOWN | An unknown error occured. |
0x81 | ERROR_INTERNAL | An internal error occured. This indicates that there could be something wrong with the serial command handler implementation. |
0x82 | ERROR_CMD_UNKNOWN | The command was not recognized by the mesh device. |
0x83 | ERROR_INVALID_STATE | The command was received at a time when the state of the device prevents it from processing it. |
0x84 | ERROR_INVALID_LENGTH | The length of the received command was incorrect. |
0x85 | ERROR_INVALID_PARAMETER | One or more of the command parameters were incorrect. |
0x86 | ERROR_BUSY | The mesh device was busy processing a previous command, or a required resource was temporarily unavailable. |
0x87 | ERROR_INVALID_DATA | Invalid data was sent as part of the command parameters. |
0x8e | ERROR_REJECTED | The command was rejected, either because of insufficient resources or because the requested resource was temporarily unavailable. |
0x93 | ERROR_TIMEOUT | The command processing was aborted because of a timeout. |
0x98 | ERROR_INVALID_KEY_DATA | The key data sent as part of the command parameters was invalid. |