Remote provisioning server example (experimental)

This example demonstrates how the client can use a remote provisioning server as a relay for provisioning nodes that it cannot reach directly.

Note

This example is experimental, meaning it is ready for use, but not qualified.

For more information about remote provisioning, see the PB-remote API reference.

The example application starts out as a normal provisionee. It starts acting as a remote provisioning server only after it has been provisioned into a network.

Running the example

To build the example, follow the instructions in Building the Mesh Stack. For commands required to program a device using nrfjprog, see the Running examples using nrfjprog section on the Running examples page.

To use this example application with the client example application, flash one device with the client application and two or more devices with the server application.

See the client documentation for instructions on how to run the example.