CLOCK peripheral driver configuration

Macros
#define	CLOCK_ENABLED
	Enable CLOCK driver. More...
#define	CLOCK_CONFIG_XTAL_FREQ
	HF XTAL Frequency. More...
#define	CLOCK_CONFIG_LF_SRC
	LF Clock Source. More...
#define	CLOCK_CONFIG_IRQ_PRIORITY
	Interrupt priority. More...
#define	CLOCK_CONFIG_LOG_ENABLED
	Enables logging in the module. More...
#define	CLOCK_CONFIG_LOG_LEVEL
	Default Severity level. More...
#define	CLOCK_CONFIG_INFO_COLOR
	ANSI escape code prefix. More...
#define	CLOCK_CONFIG_DEBUG_COLOR
	ANSI escape code prefix. More...

Detailed Description

Macro Definition Documentation

#define CLOCK_CONFIG_DEBUG_COLOR

ANSI escape code prefix.

Following options are available:

• 0 - Default
• 1 - Black
• 2 - Red
• 3 - Green
• 4 - Yellow
• 5 - Blue
• 6 - Magenta
• 7 - Cyan
• 8 - White

Note

This is an NRF_CONFIG macro.

#define CLOCK_CONFIG_INFO_COLOR

ANSI escape code prefix.

Following options are available:

• 0 - Default
• 1 - Black
• 2 - Red
• 3 - Green
• 4 - Yellow
• 5 - Blue
• 6 - Magenta
• 7 - Cyan
• 8 - White

Note

This is an NRF_CONFIG macro.

#define CLOCK_CONFIG_IRQ_PRIORITY

Interrupt priority.

Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice

Following options are available:

• 0 - 0 (highest)
• 1 - 1
• 2 - 2
• 3 - 3
• 4 - 4 (except nRF51 family)
• 5 - 5 (except nRF51 family)
• 6 - 6 (except nRF51 family)
• 7 - 7 (except nRF51 family)

Note

This is an NRF_CONFIG macro.

#define CLOCK_CONFIG_LF_SRC

LF Clock Source.

Following options are available:

• 0 - RC
• 1 - XTAL
• 2 - Synth

Note

This is an NRF_CONFIG macro.

#define CLOCK_CONFIG_LOG_ENABLED

Enables logging in the module.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.

#define CLOCK_CONFIG_LOG_LEVEL

Default Severity level.

Following options are available:

• 0 - Off
• 1 - Error
• 2 - Warning
• 3 - Info
• 4 - Debug

Note

This is an NRF_CONFIG macro.

#define CLOCK_CONFIG_XTAL_FREQ

HF XTAL Frequency.

Following options are available:

• 0 - Default (64 MHz)
• 255 - Default (16 MHz) (nRF51 family only)
• 0 - 32 MHz (nRF51 family only)

Note

This is an NRF_CONFIG macro.

#define CLOCK_ENABLED

Enable CLOCK driver.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.