Data Structures | |
| struct | nrf_dfu_bank_t |
| Description of a single bank. More... | |
| struct | dfu_progress_t |
| DFU progress. More... | |
| struct | nrf_dfu_settings_t |
| DFU settings for application and bank data. More... | |
Macros | |
| #define | INIT_COMMAND_MAX_SIZE 256 |
| #define | CODE_PAGE_SIZE (PAGE_SIZE_IN_WORDS*sizeof(uint32_t)) |
| Size of a flash codepage. This value is used for calculating the size of the reserved flash space in the bootloader region. It is checked against NRF_UICR->CODEPAGESIZE at run time to ensure that the region is correct. | |
| #define | DATA_OBJECT_MAX_SIZE (CODE_PAGE_SIZE * 4) |
| Maximum size of a data object. | |
| #define | BOOTLOADER_SETTINGS_ADDRESS (0x0003FC00UL) |
| Page location of the bootloader settings address. | |
| #define | DFU_APP_DATA_RESERVED CODE_PAGE_SIZE * 3 |
| Size of the flash space reserved for application data. | |
| #define | DFU_REGION_TOTAL_SIZE ((* (uint32_t *)NRF_UICR_BOOTLOADER_START_ADDRESS) - CODE_REGION_1_START) |
| Total size of the region between the SoftDevice and the bootloader. | |
| #define | SOFTDEVICE_REGION_START MBR_SIZE |
| Start address of the SoftDevice (excluding the area for the MBR). | |
| #define | CODE_REGION_1_START SD_SIZE_GET(MBR_SIZE) |
| Size of the Code Region 0, found in the UICR.CLEN0 register. More... | |
| #define | NRF_DFU_CURRENT_BANK_0 0x00 |
| #define | NRF_DFU_CURRENT_BANK_1 0x01 |
| #define | NRF_DFU_BANK_LAYOUT_DUAL 0x00 |
| #define | NRF_DFU_BANK_LAYOUT_SINGLE 0x01 |
| #define | NRF_DFU_BANK_INVALID 0x00 |
| DFU bank state codes. More... | |
| #define | NRF_DFU_BANK_VALID_APP 0x01 |
| #define | NRF_DFU_BANK_VALID_SD 0xA5 |
| #define | NRF_DFU_BANK_VALID_BL 0xAA |
| #define | NRF_DFU_BANK_VALID_SD_BL 0xAC |
| #define CODE_REGION_1_START SD_SIZE_GET(MBR_SIZE) |
Size of the Code Region 0, found in the UICR.CLEN0 register.
This value is identical to the start of Code Region 1. This value is used for compilation safety, because the linker will fail if the application expands into the bootloader. At run time, the bootloader uses the value found in UICR.CLEN0.
| #define INIT_COMMAND_MAX_SIZE 256 |
Maximum size of the init command stored in dfu_settings.
| #define NRF_DFU_BANK_INVALID 0x00 |
DFU bank state codes.
The DFU bank state indicates the content of a bank: A valid image of a certain type or an invalid image.Invalid image.
| #define NRF_DFU_BANK_VALID_APP 0x01 |
Valid application.
| #define NRF_DFU_BANK_VALID_BL 0xAA |
Valid bootloader.
| #define NRF_DFU_BANK_VALID_SD 0xA5 |
Valid SoftDevice.
| #define NRF_DFU_BANK_VALID_SD_BL 0xAC |
Valid SoftDevice and bootloader.