SPI/SPIM peripheral driver configuration

Macros
#define	SPI_ENABLED
	Set to 1 to activate. More...
#define	SPI_CONFIG_LOG_ENABLED
	Enables logging in the module. More...
#define	SPI_CONFIG_LOG_LEVEL
	Default Severity level. More...
#define	SPI_CONFIG_INFO_COLOR
	ANSI escape code prefix. More...
#define	SPI_CONFIG_DEBUG_COLOR
	ANSI escape code prefix. More...
#define	SPI_DEFAULT_CONFIG_IRQ_PRIORITY
	Interrupt priority. More...
#define	SPI0_ENABLED
	Enable SPI0 instance. More...
#define	SPI0_USE_EASY_DMA
	Use EasyDMA. More...
#define	SPI1_ENABLED
	Enable SPI1 instance. More...
#define	SPI1_USE_EASY_DMA
	Use EasyDMA. More...
#define	SPI2_ENABLED
	Enable SPI2 instance. More...
#define	SPI2_USE_EASY_DMA
	Use EasyDMA. More...

Detailed Description

Macro Definition Documentation

#define SPI0_ENABLED

Enable SPI0 instance.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.

#define SPI0_USE_EASY_DMA

Use EasyDMA.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.

#define SPI1_ENABLED

Enable SPI1 instance.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.

#define SPI1_USE_EASY_DMA

Use EasyDMA.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.

#define SPI2_ENABLED

Enable SPI2 instance.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.

#define SPI2_USE_EASY_DMA

Use EasyDMA.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.

#define SPI_CONFIG_DEBUG_COLOR

ANSI escape code prefix.

Following options are available:

• 0 - Default
• 1 - Black
• 2 - Red
• 3 - Green
• 4 - Yellow
• 5 - Blue
• 6 - Magenta
• 7 - Cyan
• 8 - White

Note

This is an NRF_CONFIG macro.

#define SPI_CONFIG_INFO_COLOR

ANSI escape code prefix.

Following options are available:

• 0 - Default
• 1 - Black
• 2 - Red
• 3 - Green
• 4 - Yellow
• 5 - Blue
• 6 - Magenta
• 7 - Cyan
• 8 - White

Note

This is an NRF_CONFIG macro.

#define SPI_CONFIG_LOG_ENABLED

Enables logging in the module.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.

#define SPI_CONFIG_LOG_LEVEL

Default Severity level.

Following options are available:

• 0 - Off
• 1 - Error
• 2 - Warning
• 3 - Info
• 4 - Debug

Note

This is an NRF_CONFIG macro.

#define SPI_DEFAULT_CONFIG_IRQ_PRIORITY

Interrupt priority.

Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice

Following options are available:

• 0 - 0 (highest)
• 1 - 1
• 2 - 2
• 3 - 3
• 4 - 4 (except nRF51 family)
• 5 - 5 (except nRF51 family)
• 6 - 6 (except nRF51 family)
• 7 - 7 (except nRF51 family)

Note

This is an NRF_CONFIG macro.

#define SPI_ENABLED

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.