PWM peripheral driver configuration

Macros
#define	PWM_ENABLED
	Set to 1 to activate. More...
#define	PWM_DEFAULT_CONFIG_OUT0_PIN
	Out0 pin. More...
#define	PWM_DEFAULT_CONFIG_OUT1_PIN
	Out1 pin. More...
#define	PWM_DEFAULT_CONFIG_OUT2_PIN
	Out2 pin. More...
#define	PWM_DEFAULT_CONFIG_OUT3_PIN
	Out3 pin. More...
#define	PWM_DEFAULT_CONFIG_BASE_CLOCK
	Base clock. More...
#define	PWM_DEFAULT_CONFIG_COUNT_MODE
	Count mode. More...
#define	PWM_DEFAULT_CONFIG_TOP_VALUE
	Top value. More...
#define	PWM_DEFAULT_CONFIG_LOAD_MODE
	Load mode. More...
#define	PWM_DEFAULT_CONFIG_STEP_MODE
	Step mode. More...
#define	PWM_DEFAULT_CONFIG_IRQ_PRIORITY
	Interrupt priority. More...
#define	PWM0_ENABLED
	Enable PWM0 instance. More...
#define	PWM1_ENABLED
	Enable PWM1 instance. More...
#define	PWM2_ENABLED
	Enable PWM2 instance. More...

Detailed Description

Macro Definition Documentation

#define PWM0_ENABLED

Enable PWM0 instance.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.

#define PWM1_ENABLED

Enable PWM1 instance.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.

#define PWM2_ENABLED

Enable PWM2 instance.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.

#define PWM_DEFAULT_CONFIG_BASE_CLOCK

Base clock.

Following options are available:

• 0 - 16 MHz
• 1 - 8 MHz
• 2 - 4 MHz
• 3 - 2 MHz
• 4 - 1 MHz
• 5 - 500 kHz
• 6 - 250 kHz
• 7 - 125 MHz

Note

This is an NRF_CONFIG macro.

#define PWM_DEFAULT_CONFIG_COUNT_MODE

Count mode.

Following options are available:

• 0 - Up
• 1 - Up and Down

Note

This is an NRF_CONFIG macro.

#define PWM_DEFAULT_CONFIG_IRQ_PRIORITY

Interrupt priority.

Priorities 0,1,4,5 (nRF52) are reserved for SoftDevice

Following options are available:

• 0 - 0 (highest)
• 1 - 1
• 2 - 2
• 3 - 3
• 4 - 4
• 5 - 5
• 6 - 6
• 7 - 7

Note

This is an NRF_CONFIG macro.

#define PWM_DEFAULT_CONFIG_LOAD_MODE

Load mode.

Following options are available:

• 0 - Common
• 1 - Grouped
• 2 - Individual
• 3 - Waveform

Note

This is an NRF_CONFIG macro.

#define PWM_DEFAULT_CONFIG_OUT0_PIN

Out0 pin.

Minimum value: 0 Maximum value: 31

Note

This is an NRF_CONFIG macro.

#define PWM_DEFAULT_CONFIG_OUT1_PIN

Out1 pin.

Minimum value: 0 Maximum value: 31

Note

This is an NRF_CONFIG macro.

#define PWM_DEFAULT_CONFIG_OUT2_PIN

Out2 pin.

Minimum value: 0 Maximum value: 31

Note

This is an NRF_CONFIG macro.

#define PWM_DEFAULT_CONFIG_OUT3_PIN

Out3 pin.

Minimum value: 0 Maximum value: 31

Note

This is an NRF_CONFIG macro.

#define PWM_DEFAULT_CONFIG_STEP_MODE

Step mode.

Following options are available:

• 0 - Auto
• 1 - Triggered

Note

This is an NRF_CONFIG macro.

#define PWM_DEFAULT_CONFIG_TOP_VALUE

Top value.

Note

This is an NRF_CONFIG macro.

#define PWM_ENABLED

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.