nRF5 SDK v12.1.0
Macros
CLOCK peripheral driver configuration

Macros

#define CLOCK_ENABLED
 Enable CLOCK driver. More...
 
#define CLOCK_CONFIG_XTAL_FREQ
 HF XTAL Frequency. More...
 
#define CLOCK_CONFIG_LF_SRC
 LF Clock Source. More...
 
#define CLOCK_CONFIG_IRQ_PRIORITY
 Interrupt priority. More...
 

Detailed Description

Macro Definition Documentation

#define CLOCK_CONFIG_IRQ_PRIORITY

Interrupt priority.

Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice

Following options are available:

  • 0 - 0 (highest)
  • 1 - 1
  • 2 - 2
  • 3 - 3
  • 4 - 4 (except nRF51 family)
  • 5 - 5 (except nRF51 family)
  • 6 - 6 (except nRF51 family)
  • 7 - 7 (except nRF51 family)
Note
This is an NRF_CONFIG macro.
#define CLOCK_CONFIG_LF_SRC

LF Clock Source.

Following options are available:

  • 0 - RC
  • 1 - XTAL
  • 2 - Synth
Note
This is an NRF_CONFIG macro.
#define CLOCK_CONFIG_XTAL_FREQ

HF XTAL Frequency.

Following options are available:

  • 0 - Default (64 MHz)
  • 255 - Default (16 MHz) (nRF51 family only)
  • 0 - 32 MHz (nRF51 family only)
Note
This is an NRF_CONFIG macro.
#define CLOCK_ENABLED

Enable CLOCK driver.

Set to 1 to activate.

Note
This is an NRF_CONFIG macro.

Documentation feedback | Developer Zone | Subscribe | Updated