Macros | |
| #define | NRF_CSENSE_ENABLED |
| Enabling CSENSE capcitive touch sensor module. More... | |
| #define | NRF_CSENSE_PAD_HYSTERESIS |
| Minimal value of change to decide that pad was touched. More... | |
| #define | NRF_CSENSE_PAD_DEVIATION |
| Minimal value measured on pad to take its value while calculating step. More... | |
| #define | NRF_CSENSE_MIN_PAD_VALUE |
| Minimum normalized value on pad to take its value into account. More... | |
| #define | NRF_CSENSE_MAX_PADS_NUMBER |
| Maximum number of pads used for one instance. More... | |
| #define | NRF_CSENSE_MAX_VALUE |
| Maximum normalized value got from measurement. More... | |
| #define | NRF_CSENSE_OUTPUT_PIN |
| Output pin used by lower module. More... | |
| #define NRF_CSENSE_ENABLED |
Enabling CSENSE capcitive touch sensor module.
Set to 1 to activate.
| #define NRF_CSENSE_MAX_PADS_NUMBER |
Maximum number of pads used for one instance.
| #define NRF_CSENSE_MAX_VALUE |
Maximum normalized value got from measurement.
| #define NRF_CSENSE_MIN_PAD_VALUE |
Minimum normalized value on pad to take its value into account.
| #define NRF_CSENSE_OUTPUT_PIN |
Output pin used by lower module.
This is only used when running on NRF51.
| #define NRF_CSENSE_PAD_DEVIATION |
Minimal value measured on pad to take its value while calculating step.
| #define NRF_CSENSE_PAD_HYSTERESIS |
Minimal value of change to decide that pad was touched.