[89] TWI: Static 400 µA current while using GPIOTE

This anomaly applies to IC Rev. Engineering A, build codes QIAA-AA0.


Static current consumption between 400 µA to 450 µA when using TWI in combination with GPIOTE.


  • GPIOTE is configured in event mode
  • TWI utilizes EasyDMA


Current consumption higher than specified


Turn the TWI off and back on after it has been disabled. To do so: If TWI0 is used,
*(volatile uint32_t *)0x40003FFC = 0;
*(volatile uint32_t *)0x40003FFC;
*(volatile uint32_t *)0x40003FFC = 1;
If TWI1 is used,
*(volatile uint32_t *)0x40004FFC = 0;
*(volatile uint32_t *)0x40004FFC;
*(volatile uint32_t *)0x40004FFC = 1;
write 0 followed by a 1 to the POWER register (address 0xFFC) of the TWI that needs to be disabled. Reconfiguration of TWI is required before next usage.