[20] RTC: Register values are invalid

This anomaly applies to IC Rev. Engineering B, build codes QFAA-BA0, CHAA-AA0.

It was inherited from the previous IC revision Engineering A.

Symptoms

RTC registers will not contain the correct/expected value if read.

Conditions

The RTC has been idle.

Consequences

RTC configuration cannot be determined by reading RTC registers.

Workaround

Execute the below code before you use RTC.
NRF_CLOCK->EVENTS_LFCLKSTARTED  = 0;
NRF_CLOCK->TASKS_LFCLKSTART     = 1;
while (NRF_CLOCK->EVENTS_LFCLKSTARTED == 0) {}
NRF_RTC0->TASKS_STOP = 0;

Documentation feedback | Developer Zone | Subscribe | Updated 2016-09-28