Serial status codes

Most serial commands sent to an nRF5 device will yield a command response from the device. This command response always contains a status field, indicating whether the command succeeded or what the reason for failing was.

The status codes yielded by the mesh serial interface are as follows:

Code	Name	Description
0x00	SUCCESS	The command completed successfully.
0x80	ERROR_UNKNOWN	An unknown error occured.
0x81	ERROR_INTERNAL	An internal error occured. This indicates that there could be something wrong with the serial command handler implementation.
0x82	ERROR_CMD_UNKNOWN	The command was not recognized by the mesh device.
0x83	ERROR_INVALID_STATE	The command was received at a time when the state of the device prevents it from processing it.
0x84	ERROR_INVALID_LENGTH	The length of the received command was incorrect.
0x85	ERROR_INVALID_PARAMETER	One or more of the command parameters were incorrect.
0x86	ERROR_BUSY	The mesh device was busy processing a previous command, or a required resources was temporarily unavailable.
0x87	ERROR_INVALID_DATA	Invalid data was sent as part of the command parameters.
0x8e	ERROR_REJECTED	The command was rejected, either because of insufficient resources or because the requested resource was temporarily unavailable.
0x93	ERROR_TIMEOUT	The command processing was aborted because of a time-out.
0x98	ERROR_INVALID_KEY_DATA	The key data sent as part of the command parameters was invalid.